Juniper Networks Junos OS拒绝服务漏洞

CVE编号

CVE-2021-0222

利用情况

暂无

补丁情况

N/A

披露时间

2021-01-16
漏洞描述
A vulnerability in Juniper Networks Junos OS allows an attacker to cause a Denial of Service (DoS) to the device by sending certain crafted protocol packets from an adjacent device with invalid payloads to the device. These crafted packets, which should be discarded, are instead replicated and sent to the RE. Over time, a Denial of Service (DoS) occurs. Continued receipt of these crafted protocol packets will cause an extended Denial of Service (DoS) condition, which may cause wider traffic impact due to protocol flapping. An indication of compromise is to check "monitor interface traffic" on the ingress and egress port packet counts. For each ingress packet, two duplicate packets are seen on egress. This issue can be triggered by IPv4 and IPv6 packets. This issue affects all traffic through the device. This issue affects: Juniper Networks Junos OS: 14.1X53 versions prior to 14.1X53-D53 on EX4300, QFX3500, QFX5100, EX4600; 15.1 versions prior to 15.1R7-S6 on EX4300, QFX3500, QFX5100, EX4600; 16.1 versions prior to 16.1R7-S7 on EX4300, QFX5100, EX4600; 17.1 versions prior to 17.1R2-S11 on EX4300, QFX5100, EX4600; 17.1 versions prior to 117.1R3-S2 on EX4300; 17.2 versions prior to 17.2R1-S9 on EX4300; 17.2 versions prior to 17.2R3-S3 on EX4300, QFX5100, EX4600, QFX5110, QFX5200; 17.3 versions prior to 17.3R2-S5, 17.3R3-S7 on EX4300, QFX5100, EX4600, QFX5110, QFX5200; 17.4 versions prior to 17.4R2-S9, 17.4R3 on EX4300, QFX5100, EX4600, QFX5110, QFX5200; 18.1 versions prior to 18.1R3-S9 on EX4300, QFX5100, EX4600, QFX5110, QFX5200, QFX5210, EX2300, EX3400; 18.2 versions prior to 18.2R2-S7 on EX4300; 18.2 versions prior to 18.2R3-S3 on EX4300, QFX5100, EX4600, QFX5110, QFX5200, QFX5210, EX2300, EX3400; 18.3 versions prior to 18.3R2-S3, on EX4300; 18.3 versions prior to 18.3R1-S7, 18.3R3-S1 on EX4300, QFX5100, EX4600, QFX5110, QFX5200, QFX5210, QFX5120, EX4650, EX2300, EX3400; 18.4 versions prior to 18.4R1-S5, 18.4R2-S3, 18.4R3 on EX4300, QFX5100, EX4600, QFX5110, QFX5200, QFX5210, QFX5120, EX4650, EX2300, EX3400; 19.1 versions prior to 19.1R1-S4, 19.1R2-S1, 19.1R3 on EX4300, QFX5100, EX4600, QFX5110, QFX5200, QFX5210, QFX5120, EX4650, EX2300, EX3400; 19.2 versions prior to 19.2R1-S4, 19.2R2 on EX4300; 19.2 versions prior to 19.2R1-S3, 19.2R2 on QFX5100, EX4600, QFX5110, QFX5200, QFX5210, QFX5120, EX4650, EX2300, EX3400; 19.3 versions prior to 19.3R2-S1, 19.3R3 on EX4300; 19.3 versions prior to 19.3R1-S1, 19.3R2, 19.3R3 on QFX5100, EX4600, QFX5110, QFX5200, QFX5210, QFX5120, EX4650, EX2300, EX3400;

解决建议
建议您更新当前系统或软件至最新版,完成漏洞的修复。
受影响软件情况
# 类型 厂商 产品 版本 影响面
1
运行在以下环境
应用 juniper junos 18.2 -
运行在以下环境
系统 juniper junos 14.1x53 -
运行在以下环境
系统 juniper junos 15.1 -
运行在以下环境
系统 juniper junos 16.1 -
运行在以下环境
系统 juniper junos 17.1 -
运行在以下环境
系统 juniper junos 17.2 -
运行在以下环境
系统 juniper junos 17.3 -
运行在以下环境
系统 juniper junos 17.4 -
运行在以下环境
系统 juniper junos 18.1 -
运行在以下环境
系统 juniper junos 18.2 -
运行在以下环境
系统 juniper junos 18.3 -
运行在以下环境
系统 juniper junos 18.4 -
运行在以下环境
系统 juniper junos 19.1 -
运行在以下环境
系统 juniper junos 19.2 -
运行在以下环境
系统 juniper junos 19.3 -
运行在以下环境
硬件 juniper ex2300 - -
运行在以下环境
硬件 juniper ex3400 - -
运行在以下环境
硬件 juniper ex4300 - -
运行在以下环境
硬件 juniper ex4600 - -
运行在以下环境
硬件 juniper ex4650 - -
运行在以下环境
硬件 juniper qfx3500 - -
运行在以下环境
硬件 juniper qfx5100 - -
运行在以下环境
硬件 juniper qfx5110 - -
运行在以下环境
硬件 juniper qfx5120 - -
运行在以下环境
硬件 juniper qfx5200 - -
运行在以下环境
硬件 juniper qfx5210 - -
CVSS3评分
7.4
  • 攻击路径
    相邻
  • 攻击复杂度
  • 权限要求
  • 影响范围
    已更改
  • 用户交互
  • 可用性
  • 保密性
  • 完整性
CWE-ID 漏洞类型
NVD-CWE-noinfo
阿里云安全产品覆盖情况