juniper junos 对异常条件的处理不恰当

CVE编号

CVE-2021-0290

利用情况

暂无

补丁情况

N/A

披露时间

2021-07-16
漏洞描述
Improper Handling of Exceptional Conditions in Ethernet interface frame processing of Juniper Networks Junos OS allows an attacker to send specially crafted frames over the local Ethernet segment, causing the interface to go into a down state, resulting in a Denial of Service (DoS) condition. The interface does not recover on its own and the FPC must be reset manually. Continued receipt and processing of these frames will create a sustained Denial of Service (DoS) condition. This issue is platform-specific and affects the following platforms and line cards: * MPC7E/8E/9E and MPC10E on MX240, MX480, MX960, MX2008, MX2010, and MX2020 * MX204, MX10003, MX10008, MX10016 * EX9200, EX9251 * SRX4600 No other products or platforms are affected by this vulnerability. An indication of this issue occurring can be seen in the system log messages, as shown below: user@host> show log messages | match "Failed to complete DFE tuning" fpc4 smic_phy_dfe_tuning_state: et-4/1/6 - Failed to complete DFE tuning (count 3) and interface will be in a permanently down state: user@host> show interfaces et-4/1/6 terse Interface Admin Link Proto Local Remote et-4/1/6 up down et-4/1/6.0 up down aenet --> ae101.0 This issue affects Juniper Networks Junos OS: 16.1 versions prior to 16.1R7-S7 on MX Series; 17.1R1 and later versions prior to 17.2R3-S3 on MX Series; 17.3 versions prior to 17.3R3-S8 on MX Series; 17.4 versions prior to 17.4R2-S11, 17.4R3-S1 on MX Series, SRX4600; 18.1 versions prior to 18.1R3-S10 on MX Series, EX9200 Series, SRX4600; 18.2 versions prior to 18.2R3-S3 on MX Series, EX9200 Series, SRX4600; 18.3 versions prior to 18.3R3-S1 on MX Series, EX9200 Series, SRX4600; 18.4 versions prior to 18.4R2-S3, 18.4R3 on MX Series, EX9200 Series, SRX4600; 19.1 versions prior to 19.1R2-S1, 19.1R3 on MX Series, EX9200 Series, SRX4600; 19.2 versions prior to 19.2R1-S3, 19.2R2 on MX Series, EX9200 Series, SRX4600; 19.3 versions prior to 19.3R2 on MX Series, EX9200 Series, SRX4600. This issue does not affect Juniper Networks Junos OS versions prior to 16.1R1.
解决建议
建议您更新当前系统或软件至最新版,完成漏洞的修复。
受影响软件情况
# 类型 厂商 产品 版本 影响面
1
运行在以下环境
系统 juniper junos 16.1 -
运行在以下环境
系统 juniper junos 17.1 -
运行在以下环境
系统 juniper junos 17.3 -
运行在以下环境
系统 juniper junos 17.4 -
运行在以下环境
系统 juniper junos 18.1 -
运行在以下环境
系统 juniper junos 18.2 -
运行在以下环境
系统 juniper junos 18.3 -
运行在以下环境
系统 juniper junos 18.4 -
运行在以下环境
系统 juniper junos 19.1 -
运行在以下环境
系统 juniper junos 19.2 -
运行在以下环境
系统 juniper junos 19.3 -
运行在以下环境
硬件 juniper ex9200 - -
运行在以下环境
硬件 juniper ex9204 - -
运行在以下环境
硬件 juniper ex9208 - -
运行在以下环境
硬件 juniper ex9214 - -
运行在以下环境
硬件 juniper ex9250 - -
运行在以下环境
硬件 juniper ex9251 - -
运行在以下环境
硬件 juniper ex9253 - -
运行在以下环境
硬件 juniper mx10 - -
运行在以下环境
硬件 juniper mx10000 - -
运行在以下环境
硬件 juniper mx10003 - -
运行在以下环境
硬件 juniper mx10008 - -
运行在以下环境
硬件 juniper mx10016 - -
运行在以下环境
硬件 juniper mx104 - -
运行在以下环境
硬件 juniper mx150 - -
运行在以下环境
硬件 juniper mx2008 - -
运行在以下环境
硬件 juniper mx2010 - -
运行在以下环境
硬件 juniper mx2020 - -
运行在以下环境
硬件 juniper mx204 - -
运行在以下环境
硬件 juniper mx240 - -
运行在以下环境
硬件 juniper mx40 - -
运行在以下环境
硬件 juniper mx480 - -
运行在以下环境
硬件 juniper mx5 - -
运行在以下环境
硬件 juniper mx80 - -
运行在以下环境
硬件 juniper mx960 - -
运行在以下环境
硬件 juniper srx4600 - -
CVSS3评分
6.5
  • 攻击路径
    相邻
  • 攻击复杂度
  • 权限要求
  • 影响范围
    未更改
  • 用户交互
  • 可用性
  • 保密性
  • 完整性
CWE-ID 漏洞类型
CWE-755 对异常条件的处理不恰当
阿里云安全产品覆盖情况