juniper junos 输入验证不恰当

CVE编号

CVE-2022-22223

利用情况

暂无

补丁情况

N/A

披露时间

2022-10-18
漏洞描述
On QFX10000 Series devices using Juniper Networks Junos OS when configured as transit IP/MPLS penultimate hop popping (PHP) nodes with link aggregation group (LAG) interfaces, an Improper Validation of Specified Index, Position, or Offset in Input weakness allows an attacker sending certain IP packets to cause multiple interfaces in the LAG to detach causing a Denial of Service (DoS) condition. Continued receipt and processing of these packets will sustain the Denial of Service. This issue affects IPv4 and IPv6 packets. Packets of either type can cause and sustain the DoS event. These packets can be destined to the device or be transit packets. On devices such as the QFX10008 with line cards, line cards can be restarted to restore service. On devices such as the QFX10002 you can restart the PFE service, or reboot device to restore service. This issue affects: Juniper Networks Junos OS on QFX10000 Series: All versions prior to 15.1R7-S11; 18.4 versions prior to 18.4R2-S10, 18.4R3-S10; 19.1 versions prior to 19.1R3-S8; 19.2 versions prior to 19.2R3-S4; 19.3 versions prior to 19.3R3-S5; 19.4 versions prior to 19.4R2-S6, 19.4R3-S7; 20.1 versions prior to 20.1R3-S3; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S2; 20.4 versions prior to 20.4R3-S4; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R3-S3; 21.3 versions prior to 21.3R3-S1. An indicator of compromise may be seen by issuing the command: request pfe execute target fpc0 command "show jspec pechip[3] registers ps l2_node 10" timeout 0 | refresh 1 | no-more and reviewing for backpressured output; for example: GOT: 0x220702a8 pe.ps.l2_node[10].pkt_cnt 00000076 GOT: 0x220702b4 pe.ps.l2_node[10].backpressured 00000002 <<<< STICKS HERE and requesting detail on the pepic wanio: request pfe execute target fpc0 command "show pepic 0 wanio-info" timeout 0 | no-more | match xe-0/0/0:2 GOT: 3 xe-0/0/0:2 10 6 3 0 1 10 189 10 0x6321b088 <<< LOOK HERE as well as looking for tail drops looking at the interface queue, for example: show interfaces queue xe-0/0/0:2 resulting in: Transmitted: Total-dropped packets: 1094137 0 pps << LOOK HERE
解决建议
建议您更新当前系统或软件至最新版,完成漏洞的修复。
受影响软件情况
# 类型 厂商 产品 版本 影响面
1
运行在以下环境
系统 juniper junos * Up to
(excluding)
15.1
运行在以下环境
系统 juniper junos 15.1 -
运行在以下环境
系统 juniper junos 18.4 -
运行在以下环境
系统 juniper junos 19.1 -
运行在以下环境
系统 juniper junos 19.2 -
运行在以下环境
系统 juniper junos 19.3 -
运行在以下环境
系统 juniper junos 19.4 -
运行在以下环境
系统 juniper junos 20.1 -
运行在以下环境
系统 juniper junos 20.2 -
运行在以下环境
系统 juniper junos 20.3 -
运行在以下环境
系统 juniper junos 20.4 -
运行在以下环境
系统 juniper junos 21.1 -
运行在以下环境
系统 juniper junos 21.2 -
运行在以下环境
系统 juniper junos 21.3 -
运行在以下环境
硬件 juniper qfx10002 - -
运行在以下环境
硬件 juniper qfx10008 - -
运行在以下环境
硬件 juniper qfx10016 - -
CVSS3评分
6.5
  • 攻击路径
    相邻
  • 攻击复杂度
  • 权限要求
  • 影响范围
    未更改
  • 用户交互
  • 可用性
  • 保密性
  • 完整性
CWE-ID 漏洞类型
CWE-20 输入验证不恰当
阿里云安全产品覆盖情况