不加限制或调节的资源分配

CVE编号

CVE-2023-22397

利用情况

暂无

补丁情况

N/A

披露时间

2023-01-13
漏洞描述
An Allocation of Resources Without Limits or Throttling weakness in the memory management of the Packet Forwarding Engine (PFE) on Juniper Networks Junos OS Evolved PTX10003 Series devices allows an adjacently located attacker who has established certain preconditions and knowledge of the environment to send certain specific genuine packets to begin a Time-of-check Time-of-use (TOCTOU) Race Condition attack which will cause a memory leak to begin. Once this condition begins, and as long as the attacker is able to sustain the offending traffic, a Distributed Denial of Service (DDoS) event occurs. As a DDoS event, the offending packets sent by the attacker will continue to flow from one device to another as long as they are received and processed by any devices, ultimately causing a cascading outage to any vulnerable devices. Devices not vulnerable to the memory leak will process and forward the offending packet(s) to neighboring devices. Due to internal anti-flood security controls and mechanisms reaching their maximum limit of response in the worst-case scenario, all affected Junos OS Evolved devices will reboot in as little as 1.5 days. Reboots to restore services cannot be avoided once the memory leak begins. The device will self-recover after crashing and rebooting. Operator intervention isn't required to restart the device. This issue affects: Juniper Networks Junos OS Evolved on PTX10003: All versions prior to 20.4R3-S4-EVO; 21.3 versions prior to 21.3R3-S1-EVO; 21.4 versions prior to 21.4R2-S2-EVO, 21.4R3-EVO; 22.1 versions prior to 22.1R1-S2-EVO, 22.1R2-EVO; 22.2 versions prior to 22.2R2-EVO. To check memory, customers may VTY to the PFE first then execute the following show statement: show jexpr jtm ingress-main-memory chip 255 | no-more Alternatively one may execute from the RE CLI: request pfe execute target fpc0 command "show jexpr jtm ingress-main-memory chip 255 | no-more" Iteration 1: Example output: Mem type: NH, alloc type: JTM 136776 bytes used (max 138216 bytes used) 911568 bytes available (909312 bytes from free pages) Iteration 2: Example output: Mem type: NH, alloc type: JTM 137288 bytes used (max 138216 bytes used) 911056 bytes available (909312 bytes from free pages) The same can be seen in the CLI below, assuming the scale does not change: show npu memory info Example output: FPC0:NPU16 mem-util-jnh-nh-size 2097152 FPC0:NPU16 mem-util-jnh-nh-allocated 135272 FPC0:NPU16 mem-util-jnh-nh-utilization 6
解决建议
建议您更新当前系统或软件至最新版,完成漏洞的修复。
受影响软件情况
# 类型 厂商 产品 版本 影响面
1
运行在以下环境
系统 juniper junos_os_evolved * Up to
(excluding)
20.4
运行在以下环境
系统 juniper junos_os_evolved 20.4 -
运行在以下环境
系统 juniper junos_os_evolved 21.3 -
运行在以下环境
系统 juniper junos_os_evolved 21.4 -
运行在以下环境
系统 juniper junos_os_evolved 22.1 -
运行在以下环境
系统 juniper junos_os_evolved 22.2 -
运行在以下环境
硬件 juniper ptx10003 - -
CVSS3评分
6.1
  • 攻击路径
    相邻
  • 攻击复杂度
  • 权限要求
  • 影响范围
    已更改
  • 用户交互
  • 可用性
  • 保密性
  • 完整性
CWE-ID 漏洞类型
CWE-367 检查时间与使用时间(TOCTOU)的竞争条件
CWE-770 不加限制或调节的资源分配
阿里云安全产品覆盖情况